We offer a range of premium Millboard decking accessories to ensure a seamless finish for your decking project. From accessories to match any chosen decking colour, to tools and equipment needed to guarantee easy and efficient installation - we have you covered.
Millboard
SB BOARD
Made to be versatile, Enhanced Grain SB, is a slim decking board that has been crafted to accomplish desired deck designs and edging applications. The 126mm decking board can be used alongside the standard 176mm Enhanced Grain board to individualise your outside living space.
Application: Edging for decking, seating, stairs and planters
Size: 32mm T x 126mm W x 3600mm L
Colour options:
Limed Oak - MSB-L
Golen Oak - MSB-G
Antique Oak - MSB-A
Smoked Oak - MSB-S
Brushed Basalt – MSB-BB
Burnt Cedar – MSB-BC
Millboard
FASCIA BOARD
Fascias as beautiful as the rest of your Millboard deck! Available in the same Millboard colours to match the rest of your deck, Millboard fascias provide a smart finish to your Millboard deck that will elevate it beyond any ordinary decking product.
Application: Deck fascia, seat fronts, stair fronts and planter sides
Size: 16mm T x 146mm W x 3200mm L
Colour options:
Golden Oak - MF-G
Antique Oak - MF-A
Smoked Oak - MF-S
Brushed Basalt - MF-BB
Millboard
BULLNOSE BOARD
Designed to match your Millboard decking or cladding, Millboard's bullnose board is 150mm wide with a bullnose profile to one edge, providing a stylish finish without the need for separate edging.
Application: Edging for decking, seating, stairs and planters
Size: 32mm T x 150mm W x 3200mm L
Colour options:
Limed Oak - MB-L
Golen Oak - MB-G
Antique Oak - MB-A
Smoked Oak - MB-S
Brushed Basalt – MB-BB
Vintage Oak – MB-V
Millboard
TOUCH-UP COATING
Millboard touch-up coating is perfect for colouring cut ends, disguising mitered edges and more.
Application: For touching up Millboard products
Size: 500ml tin
Colour Options:
Limed Oak - MT-L
Golen Oak - MT-G
Antique Oak - MT-A
Smoked Oak - MT-S
Brushed Basalt – MT-BB
Vintage Oak – MT-V
Millboard
DURAFIX SCREWS
Millboard's unique, hidden decking fixings make installing Millboard simple. These Durafix® 60mm screws are designed for use with all Millboard planks, fascia and edging.
Construction: Stainless steel, featuring a self-cutting tip, six-point Torx head
Size: 60mm | Box/250
Product code: MA-D60
Millboard
MULTI SPACER
The Millboard spacer is a multi-sided tool with each side set to a different width, designed to ensure accurate spacing between Millboard lengths in the quickest way possible.
Size: Allows for spacing of 3mm, 4mm, 5mm, 6mm spacing between boards
Product code: MA-MS
Millboard
DUOLIFT JOIST FOOT
Providing an exceptional height range of 45mm, from 15-60mm, the DuoLift® Joist Cradle enables precision height adjustment with 5mm markings on the side and each quarter turn of the adjustment ring representing a 1mm rise or fall.
Application: Decking subframes
Product Code: DL-F
Millboard
DUOLIFT JOIST RISER
The Riser component of the DuoLift® system increases the height in increments of 45mm. It is capable of sitting directly onto a solid substrate under the Joist Cradle and Self-Levelling Joint or forming part of a higher stack with a foot beneath.
Construction: A2 Stainless Steel
Application: Decking subframes
Product code: DL-R
Millboard
DUOLIFT SELF-LEVELLING JOINT
Adding 20mm to the height of the supports, the DuoLift® Self-levelling Joint provides easy and effective levelling of a subframe up to 5º, ready for decking installation.
Application: Decking subframes
Product code: DL-SL
Millboard
DUOLIFT JOIST CRADLE
Providing an exceptional height range of 45mm, from 15-60mm, the DuoLift® Joist Cradle enables precision height adjustment with 5mm markings on the side and each quarter turn of the adjustment ring representing a 1mm rise or fall. The Joist Cradle allows the installer to adjust the height whilst the joist is in place, locking tabs provide a secure finish once correct height has been determined.
Application: Decking subframes
Product code: DL-JC
Millboard
DUOLIFT SIDE-FIXING GUIDE KIT
Millboard's innovative tool provides a quick and easy solution to fix the boards from the side, resulting in a clean, hidden fixing finish, keeping the face of the board completely clear of screw holes. This quality gives a clean look, even when used with lighter coloured boards.
Product code: MA-DG
Millboard
ACOUSTIC SEPARATION PAD
Agglomerated cork and recycled rubber pads offer a layer of protection between joist supports and membranes, as well as providing an acoustic benefit.
Application: Decking subframes
Size: 3mm
Product code: DL-AP
VIEW MILLBOARD DECKING COLLECTION
